Related Records

1. 22 Caliber Pistol - Revolver

   22 Caliber Revolver, n.d. Engraved curved handle that leads to the firing mechanism and trigger. Trigger is framed by metal oval. Above trigger is 6-shot firing mechanism which leads to narrow cylindrical barrel. Small notched sight on end of barrel. Small metal rod for empty cartridge release below barrel. Handle is engraved with a floral and vine pattern.

   Record Type: Object

   
2. Automobile Jack, November 18, 1909 - Jack, Automotive

   Automobile Jack, November 18, 1909. Metal rectangular base with four ribs leading to metal rectangular shaft with a metal upturned crescent at top. Rectangular shaft widens at top of length containing jack mechanisms. Cylindrical metal handle used as lever protrudes from side of widened rectangular shaft, for jack mechanism. Metal triangular crescent piece protrudes from opposite side, for lifting. Embossed text on rectangular shaft.

   Record Type: Object

   
3. Belfast Sparkling Water Seltzer Bottle, 1935 - Bottle, Seltzer

   Belfast Sparkling Water Seltzer Bottle, 1935. Clear glass bottle with green text reading, "Belfast Sparkling Water". Cylindrical in shape. Two inches of clear liquid at bottom. Bottle tapers at neck to metal cap with spout and handle at top. Metal cap has embossed text. Two seams extend length of bottle. Clear tube inside extends length of bottle from cap.

   Record Type: Object

   
4. Block and Tackle, c. 1930-1960 - Block and Tackle

   Block and Tackle, c. 1930-1960. Double cylindrical wooden block with two metal rings for pulley system. Metal rings connected to wooden block through metal rod. Metal ring connected to wooden block attaches metal U-hook tackle.

   Record Type: Object

   
5. Bonham Garden Cultivator, 1944 - Cultivator, Walking

   Company garden cultivator has wooden handles with wood cross beam ending at 6-spoked iron wheel which is painted green. Small V-shaped spike tooth cultivator unit with four spikes that sits just behind wheel is also painted green. Wooden grips are affixed to squared iron loops at handle ends.

   Record Type: Object

   
6. Carbide Bicycle Lamp, c. 1898-1917 - Lamp, Bicycle

   Carbide Bicycle Lamp, c. 1898-1917. Silver cylindrical metal base narrows then widens to spherical center with a raised circular lid. Lid has embossed pattern and text reading, "Solar". Canister base screws into circular light mechanism. Side has glass lens with metal cone frame. Opposite side has flat circular container that has a rounded opening with a screw top. Below container is a circular metal ring to attach to bicycle. Spherical center ha...

   Record Type: Object

   
7. Cavali Bros. Dealers and General Store Blank Receipt, c. 1903-1920 - Receipt

   Receipt, c. 1903-1920. Cavalli Bros. Store blank receipt paper. Lined paper, front and back. Heading on top of paper, text reads, 'Bought of Cavalli Bros. Dealers and General Merchandise". 14" x 8 5/8".

   Record Type: Archive

   
8. Cavalli Bros. Bottle Capper, PAT. 1933 - Capper, Bottle

   Cavalli Bros. Bottle Capper, PAT. 1933 Rectangular base with circular area, for bottle, narrows and connects to an upright rectangular shaft. Rectangular shaft curves to a cylindrical capping mechanism. Connected to the rectangular shaft the cylindrical metal bar with horizontal ridges on inner side ends with circular metal capper. Cylindrical metal handle protrudes from rectangular shaft that ends with a red grip. Metal handle moves ribbed bar ...

   Record Type: Object

   
9. Cavalli Scythe, c. 1927-1933 - Scythe

   Cavalli Scythe, c. 1927-1933. Serpentine cylindrical wooden handle with two perpendicular wooden handles. Two metal screws attach scythe blade. Blade is curved with raised top edge.

   Record Type: Object

   
10. Cobbler's Hammer, c. 1930-1960 - Hammer, Cobbler's

    Cobbler's Hammer, c. 1930-1960. Wooden handle slightly tapers to metal hammer head. Wood travels through hole in hammer head to attach together, wood can be seen from top of hammer head. Metal head is rectangular shape than narrows to thin oval shape with rounded edge. Rectangular side of hammer head has eight flat edges.

    Record Type: Object

    
11. Cobbler's Shoe Last, c. 1930-1960 - Last, Shoe

    Cobbler's Shoe Last, c. 1930-1960. Small curved shoe mold that rises through foot arch with two ribbed seams traveling length of mold. Two seams extend up to raised oval-shaped casement. Casement is hollow for cobbler's shoe last tool.

    Record Type: Object

    
12. Cobbler's Shoe Last, c. 1930-1960 - Last, Shoe

    Cobbler's Shoe Last, c. 1930-1960. Large curved shoe mold that rises through foot arch with two ribbed seams traveling length of mold. Two seams extend up to raised oval-shaped casement. Casement is hollow for cobbler's shoe last tool.

    Record Type: Object

    
13. Cobbler's Shoe Last, c. 1930-1960 - Last, Shoe

    Cobbler's Shoe Last, c. 1930-1960. Medium curved shoe mold that rises through foot arch with two ribbed seams traveling length of mold. Two seams extend up to raised oval-shaped casement. Casement is hollow for cobbler's shoe last tool with scalloped sides.

    Record Type: Object

    
14. Cobbler's Shoe Last, c. 1930-1960 - Last, Shoe

    Cobbler's Shoe Last, c. 1930-1960. Medium curved shoe mold that rises through foot arch with two ribbed seams traveling length of mold. Two seams extend up to raised oval-shaped casement. Casement is hollow for cobbler's shoe last tool. Embossed text on mold.

    Record Type: Object

    
15. Cobblers's Shoe Last Anvil, December 23, 1890 - Anvil, Shoemaker's

    Cobblers's Shoe Last Anvil, December 23, 1890. Scalloped rectangular bottom narrows at center to four ribbed seams running up length of rectangular shaft. Top narrows to thin flat rectangular shape. Embossed vertical text on rectangular shaft. Used for holding shoe lasts.

    Record Type: Object

    
16. Cross-cut Saw Handle, c. 1930-1960 - Handle

    Cross-Cut Saw Handle, c. 1930-1960. Cylindrical wooden handle extends length. Screw attaches perpendicularly to wooden handle and runs length through wood. Opposite side of screw has cylindrical metal handle piece. Split rectangular metal piece rotates around screw next to handle. Screw ends with metal bolt.

    Record Type: Object

    
17. Cross-cut Saw Handle, c. 1930-1960 - Handle

    Cross-Cut Saw Handle, c. 1930-1960. Cylindrical wooden handle extends length. Screw attaches perpendicularly to wooden handle and runs length through wood. Opposite side of screw has cylindrical metal handle piece. Split rectangular metal piece rotates around screw next to handle. Screw ends with metal bolt.

    Record Type: Object

    
18. Crucible, c. 1910-1940 - Crucible, Metal

    Crucible, c. 1910-1940. Crucible for making lead fishing weights, used in the ocean to catch fish and rock fish. Metal bar horizontally extending, intersecting the bottom of the metal bowl. Metal bar has ribbing closest to bowl. At bottom of bowl there is a protruding metal ring. Top lip of bowl has four protruding screws on outside raised rim.

    Record Type: Object

    
19. Crucible with Lead and Slack, c. 1910-1940 - Crucible, Metal

    Crucible with Lead and Slack, c. 1910-1940. Cylindrical base widens to rounded body. Two protruding metal pieces have holes for attached metal rounded handle. Inside cauldron holds square lead block and steel wool. Used to make fishing weights. Lead was manufactured by the Bunker Hill & Sullivan Mining and Concentrating Company in Kellogg, Idaho.

    Record Type: Object

    
20. DC3 Tail Wheel Shear Pin, c. 1936-1955 - Pin, Cotter

    DC3 Tail Wheel Shear Pin, c. 1936-1955. Used to lock the airplane's tail wheel in the straight position for take-off and landing. Cylindrical metal tube with screw ridges at end. Other end has opening and screw ridges inside hole. Embossed yellow text on black label strips circumventing metal tube. Clear tape over labels secure labels to metal tube.

    Record Type: Object

    
21. Deer Scale, c. 1837-1868 - Scale, Animal

    Deer Scale, c. 1837-1868. Flat metal piece bent into open oval shape. Flat crescent metal piece attached inside metal oval with dash marks and numbering. Twisted metal piece used to gage weight attached at opposite side of oval. On bottom, large and small "S"hooks attached by metal rings to center oval. On top, small and large metal rings attached by metal rings to center oval.

    Record Type: Object

    
22. Dowel Cutter, c. 1930-1960 - Cutter, Wood

    Dowel Cutter, c. 1930-1960. Interlocking metal and screw pieces attached to a circular ring tapering to three upward ridged rectangular metal shafts. Three shafts come together to circular metal shaft that indents to a four sided metal point. Dowel cutter, attaches to hand drill to score and cut end off of dowel.

    Record Type: Object

    
23. Fishing Spear, n.d. - Spear, Fish

    Fishing Spear, n.d. Long yellow tube with metal tube attaching three metal prongs. Whole tube at end with rope tassels.

    Record Type: Object

    
24. Foundry Ladle, c. 1910-1940 - Ladle, Hot Metal

    Foundry Ladle, c. 1910-1940. Ladle for lead for making fish weights. Long narrow handle that tapers to half sphere bowl. Bowl has two lips bisecting laterally from handle. Back side of long handle tapers inward in concave direction. Circular hole at end of handle.

    Record Type: Object

    
25. Hand Drill, c. 1930-1960 - Drill, Hand

    Hand Drill, c. 1930-1960. Coupling head where drill bit would attach has vertical ribbing and tapers to circular shaft. Circular shaft runs length of tool, ends with smooth crescent metal piece. Wooden handle protrudes perpendicularly from circular shaft, with rounded finished end. Large gear mechanism in center with ribbed outer and inner edges connects to "S" shaped metal handle with attached wooden handle. Large center gear connects to smalle...

    Record Type: Object