Related Records

1. Box Scraper - Weeder

   Solid iron metal box scraper has two large 16-spoke wooden wheels, painted gray, with iron metal band tires. A long square wooden beam with broken front end is mounted to front with heavy iron metal brackets. Scraper itself is a large shallow box with an open front. Two crosspieces attached above box are mounted to an iron level that extends out center back and attaches via a vertical metal hook to back of box for adjusting angle of scraper. ...

   Record Type: Object

   
2. Cultivator - Cultivator, Walking

   Small walking cultivator has large 8-spoked iron wheel in front, small 5 prong cultivator in back and two oak wooden handles with curved grips and wooden dowel cross bar. Handles are mounted to wheel and cultivator by flat iron bar brackets. Used for weeding; it pops out weeds you do not want.

   Record Type: Object

   
3. Holt Scraper, 1909 - Weeder

   1909 Holt scraper is solid iron with a 2x4-inch wooden crosspiece above box. Back beam handle is curved iron. Box has a curved back, flat sides and open front. Top wooden beam is affixed via iron nuts and bolts to one of many notches in thick iron bracket that is mounted to sides and extend in front of and above box for adjusting scraper angle. Two looped iron rods extend out front and are mounted to inside sides of box.

   Record Type: Object

   
4. Homemade Weeder/Scraper - Weeder

   Homemade Weeder/Scraper has a flat wooden wheel lined on outside with a flat piece of iron metal. Wooden bracket extends from wheel at back of which are mounted two wooden handles with perpendicular wooden grips mounted to ends. Handles are supported by an iron bar cross piece. Perpendicular T-shaped iron scraper with a flat bottom is mounted to wooden bracket behind wheel.

   Record Type: Object

   
5. Morning Glory Cutter - Cutter

   Painted red iron metal morning mlory cutter with painted long yellow wooden beam out front. Large twelve-spoke metal wheels on sides affixed to iron axle mounted to think horizontal wooden beam, painted red. Spade-shaped seat with single row of oval perforations mounted above where wooden beams intersect. Extending behind beam are four c-shaped pieces mounted to horizontal bars and used for popping out weeds. A wire spring vertical lever is m...

   Record Type: Object

   
6. Scraper - Weeder

   Solid iron metal scraper with 2x4 top crosspiece mounted above box with nuts and bolts to one of many notches in iron thick iron bracket that are mounted to box sides and extend above and in front of box. This piece can be moved to adjust angle of scraper. Scraper has a curved back and bottom, open front and flat sides inside of which two looped iron rods are mounted. A length of chain is attached to the left loop end. A long curved looped-en...

   Record Type: Object

   
7. Weed Cutter - Cutter, Weed

   Weed Cutter. Weeder is used to scrape up low-growing weeds like morning glories. Beam and seat stand are made of solid wood 4x4s with an approximate 1x6 horizontal board bolted to bottom of beam to serve as a footrest. Metal conforming seat is painted gray and has holes throughout. Wooden handle arms extend from footrest back and taper and curve at ends, forming handle grips. Flat metal brackets, painted gray, extend down from arms, just behind s...

   Record Type: Object